VIBESTA Capra 30 LED Panel Light - Daylight

In stock

The Capra 30 is a 1x1' panel with 360 high-power LEDs and a high CRI of 85. This light weight, durable panel is a perfect unit for photographers and videographers shooting both in the studio and on location. When in the studio, you can power the unit via the included AC Power Adapter, and when you are shooting on location, you can power the light via its built-in v-mount battery plate. At full power, you can achieve roughly 1.75 hours of run time on a 99Wh battery.

Daylight units have 360 daylight LEDs, while bi-color units have 180 daylight LEDs and 180 tungsten LEDs. This light can be dimmed from 0-100%, via a dimmer knob on the back of the light, without any noticeable shift in color quality. Bi-color units have an additional knob which allows you to smoothly blend between the daylight and tungsten LEDs. The bi-color lights are perfect for interviews when you may need to warm or cool the light based on your talent's skin tone.

A 60° beam angle gives you a wide, even beam of light with a soft fall off around the beam's edge. An included diffusion filter can be placed on the front of the light to soften and further widen the light's beam making a glamorous light source. All units come pre-installed with LinkPorts that allow you to connect multiple units via RJ11 cable. When multiple units are linked together, you can dim any light in the series, and all the connected lights will dim in unison. This works for both intensity and color temperature. On the top and bottom of the units there are QuickSnap connection points that allow you to easily stack units together. This is a great feature if you need to create a larger source light. Simply stack them together until you reach your desired intensity / size, and you will not take up any more floor space.

More Information
Barcode 4250972500145
Manufacturer Vibesta
Country of Manufacture China
Illuminance up to 2700 Lux @ 1m (Full Power)
Color Temperature (CCT) Daylight
Beam Angle 60 Degrees
Color Rendition 85 CRI
Dimming 0-100% Continuous
Estimated LED Lifetime 50,000 Hours
Thermal Design Passive
Power Options V-Mount, AC Adapter, Sold Separately Batteries
Power Consumption 29W
Power Voltage 10~18V
Battery Lifetime N/A
Mounting Options Yoke w/ Stand Mount
Package Contents

(1x) Capra 30 Daylight LED Panel Light

(1x) AC Power Adapter (Input: 100-240VAC, 50/60Hz, 2.0A / Output: 12VDC 4.0A)

(1x) Diffusion Filter

Write Your Own Review
You're reviewing:VIBESTA Capra 30 LED Panel Light - Daylight
Your Rating